c++ - When does using a std::multimap make sense

Question

I am currently experimenting on some usage of stl-datastructures. However I am still not sure when to use which one and when to use a certain combination. Currently I am trying to figure out, when using a std::multimap does make sense. As far as I can see, one can easily build ones own multimap implementation by combining std::map and std::vector. So I am left with the question when each of these datastructures should be used.

• Simplicity: A std::multimap is definitely simpler to use, because one does not have to handle the additional nesting. However access to a range of elements as a bulk one might need to copy the data from the iterators to another datastructure (for example a std::vector).
• Speed: The locality of the vector most likely makes iterating over the range of equal element much faster, because the cache usage is optimized. However I am guessing that std::multimaps also have a lot of optimization tricks behind the back to make iterating over equal elements as fast as possible. Also getting to the correct element-range might probably be optimized for std::multimaps.

In order to try out the speed issues I did some simple comparisons using the following program:

#include <stdint.h>
#include <iostream>
#include <map>
#include <vector>
#include <utility>

typedef std::map<uint32_t, std::vector<uint64_t> > my_mumap_t;

const uint32_t num_partitions = 100000;
const size_t num_elements =     500000;

int main() {
  srand( 1337 );
  std::vector<std::pair<uint32_t,uint64_t>> values;
  for( size_t i = 0; i <= num_elements; ++i ) {
    uint32_t key = rand() % num_partitions;
    uint64_t value = rand();
    values.push_back( std::make_pair( key, value ) );
  }
  clock_t start;
  clock_t stop;
  {
    start = clock();
    std::multimap< uint32_t, uint64_t > mumap;
    for( auto iter = values.begin(); iter != values.end(); ++iter ) {
      mumap.insert( *iter );
    }
    stop = clock();
    std::cout << "Filling std::multimap: " << stop - start << " ticks" << std::endl;
    std::vector<uint64_t> sums;
    start = clock();
    for( uint32_t i = 0; i <= num_partitions; ++i ) {
      uint64_t sum = 0;
      auto range = mumap.equal_range( i );
      for( auto iter = range.first; iter != range.second; ++iter ) {
        sum += iter->second;
      }
      sums.push_back( sum );
    }
    stop = clock();
    std::cout << "Reading std::multimap: " << stop - start << " ticks" << std::endl;
  }
  {
    start = clock();
    my_mumap_t mumap;
    for( auto iter = values.begin(); iter != values.end(); ++iter ) {
      mumap[ iter->first ].push_back( iter->second );
    }
    stop = clock();
    std::cout << "Filling my_mumap_t: " << stop - start << " ticks" << std::endl;
    std::vector<uint64_t> sums;
    start = clock();
    for( uint32_t i = 0; i <= num_partitions; ++i ) {
      uint64_t sum = 0;
      auto range = std::make_pair( mumap[i].begin(), mumap[i].end() );
      for( auto iter = range.first; iter != range.second; ++iter ) {
        sum += *iter;
      }
      sums.push_back( sum );
    }
    stop = clock();
    std::cout << "Reading my_mumap_t: " << stop - start << " ticks" << std::endl;
  }
}

As I suspected it depends mainly on the ratio between num_partitions and num_elements, so I am still at a loss here. Here are some example outputs:

For num_partitions = 100000 and num_elements = 1000000

Filling std::multimap: 1440000 ticks
Reading std::multimap: 230000 ticks
Filling    my_mumap_t: 1500000 ticks
Reading    my_mumap_t: 170000 ticks

For num_partitions = 100000 and num_elements = 500000

Filling std::multimap: 580000 ticks
Reading std::multimap: 150000 ticks
Filling    my_mumap_t: 770000 ticks
Reading    my_mumap_t: 140000 ticks

For num_partitions = 100000 and num_elements = 200000

Filling std::multimap: 180000 ticks
Reading std::multimap:  90000 ticks
Filling    my_mumap_t: 290000 ticks
Reading    my_mumap_t: 130000 ticks

For num_partitions = 1000 and num_elements = 1000000

Filling std::multimap: 970000 ticks
Reading std::multimap: 150000 ticks
Filling    my_mumap_t: 710000 ticks
Reading    my_mumap_t:  10000 ticks

I am unsure about how to interpret these results. How would you go about deciding for the correct data structure? Are there any additional constraints for the decission, which I might have missed?

question from:https://stackoverflow.com/questions/8342445/when-does-using-a-stdmultimap-make-sense

Answer 1

It's hard to tell whether your benchmark is doing the right thing, so I can't comment on the numbers. However, a few general points:

• Why multimap rather than map of vectors: Maps, multimaps, sets and multisets are all essentially the same data structure, and once you have one, it's trivial to just spell out all four. So the first answer is, "why not have it"?

• How is it useful: Multimaps are one of those things that you need rarely, but when you need them, you really need them.

• Why not roll my own solution? As I said, I'm not sure about those benchmarks, but even if you could make something else that isn't worse than the standard container (which I question), then you should consider the overall burden of getting it right, testing it and maintaining it. Imagine a world in which you would be taxed for every line of code you wrote (that's Stepanov's suggestion). Re-use industry-standard components whenever possible.

Finally, here's the typical way you iterate a multimap:

for (auto it1 = m.cbegin(), it2 = it1, end = m.cend(); it1 != end; it1 = it2)
{
  // unique key values at this level
  for ( ; it2 != end && it2->first == it1->first; ++it2)
  {
    // equal key value (`== it1->first`) at this level
  }
}