As @jlarson updated with information that Mac was the biggest culprit we might get some further. Office for Mac has, at least 2011 and back, rather poor support for reading Unicode formats when importing files.
Support for UTF-8 seems to be close to non-existent, have read a tiny few comments about it working, whilst the majority say it does not. Unfortunately I do not have any Mac to test on. So again: The files themselves should be OK as UTF-8, but the import halts the process.
Wrote up a quick test in Javascript for exporting percent escaped UTF-16 little and big endian, with- / without BOM etc.
Code should probably be refactored but should be OK for testing. It might work better then UTF-8. Of course this also usually means bigger data transfers as any glyph is two or four bytes.
You can find a fiddle here:
Unicode export sample Fiddle
Note that it does not handle CSV in any particular way. It is mainly meant for pure conversion to data URL having UTF-8, UTF-16 big/little endian and +/- BOM. There is one option in the fiddle to replace commas with tabs, – but believe that would be rather hackish and fragile solution if it works.
Typically use like:
// Initiate
encoder = new DataEnc({
mime : 'text/csv',
charset: 'UTF-16BE',
bom : true
});
// Convert data to percent escaped text
encoder.enc(data);
// Get result
var result = encoder.pay();
There is two result properties of the object:
1.) encoder.lead
This is the mime-type, charset etc. for data URL. Built from options passed to initializer, or one can also say .config({ ... new conf ...}).intro() to re-build.
data:[<MIME-type>][;charset=<encoding>][;base64]
You can specify base64, but there is no base64 conversion (at least not this far).
2.) encoder.buf
This is a string with the percent escaped data.
The .pay() function simply return 1.) and 2.) as one.
Main code:
function DataEnc(a) {
this.config(a);
this.intro();
}
/*
* http://www.iana.org/assignments/character-sets/character-sets.xhtml
* */
DataEnc._enctype = {
u8 : ['u8', 'utf8'],
// RFC-2781, Big endian should be presumed if none given
u16be : ['u16', 'u16be', 'utf16', 'utf16be', 'ucs2', 'ucs2be'],
u16le : ['u16le', 'utf16le', 'ucs2le']
};
DataEnc._BOM = {
'none' : '',
'UTF-8' : '%ef%bb%bf', // Discouraged
'UTF-16BE' : '%fe%ff',
'UTF-16LE' : '%ff%fe'
};
DataEnc.prototype = {
// Basic setup
config : function(a) {
var opt = {
charset: 'u8',
mime : 'text/csv',
base64 : 0,
bom : 0
};
a = a || {};
this.charset = typeof a.charset !== 'undefined' ?
a.charset : opt.charset;
this.base64 = typeof a.base64 !== 'undefined' ? a.base64 : opt.base64;
this.mime = typeof a.mime !== 'undefined' ? a.mime : opt.mime;
this.bom = typeof a.bom !== 'undefined' ? a.bom : opt.bom;
this.enc = this.utf8;
this.buf = '';
this.lead = '';
return this;
},
// Create lead based on config
// data:[<MIME-type>][;charset=<encoding>][;base64],<data>
intro : function() {
var
g = [],
c = this.charset || '',
b = 'none'
;
if (this.mime && this.mime !== '')
g.push(this.mime);
if (c !== '') {
c = c.replace(/[-s]/g, '').toLowerCase();
if (DataEnc._enctype.u8.indexOf(c) > -1) {
c = 'UTF-8';
if (this.bom)
b = c;
this.enc = this.utf8;
} else if (DataEnc._enctype.u16be.indexOf(c) > -1) {
c = 'UTF-16BE';
if (this.bom)
b = c;
this.enc = this.utf16be;
} else if (DataEnc._enctype.u16le.indexOf(c) > -1) {
c = 'UTF-16LE';
if (this.bom)
b = c;
this.enc = this.utf16le;
} else {
if (c === 'copy')
c = '';
this.enc = this.copy;
}
}
if (c !== '')
g.push('charset=' + c);
if (this.base64)
g.push('base64');
this.lead = 'data:' + g.join(';') + ',' + DataEnc._BOM[b];
return this;
},
// Deliver
pay : function() {
return this.lead + this.buf;
},
// UTF-16BE
utf16be : function(t) { // U+0500 => %05%00
var i, c, buf = [];
for (i = 0; i < t.length; ++i) {
if ((c = t.charCodeAt(i)) > 0xff) {
buf.push(('00' + (c >> 0x08).toString(16)).substr(-2));
buf.push(('00' + (c & 0xff).toString(16)).substr(-2));
} else {
buf.push('00');
buf.push(('00' + (c & 0xff).toString(16)).substr(-2));
}
}
this.buf += '%' + buf.join('%');
// Note the hex array is returned, not string with '%'
// Might be useful if one want to loop over the data.
return buf;
},
// UTF-16LE
utf16le : function(t) { // U+0500 => %00%05
var i, c, buf = [];
for (i = 0; i < t.length; ++i) {
if ((c = t.charCodeAt(i)) > 0xff) {
buf.push(('00' + (c & 0xff).toString(16)).substr(-2));
buf.push(('00' + (c >> 0x08).toString(16)).substr(-2));
} else {
buf.push(('00' + (c & 0xff).toString(16)).substr(-2));
buf.push('00');
}
}
this.buf += '%' + buf.join('%');
// Note the hex array is returned, not string with '%'
// Might be useful if one want to loop over the data.
return buf;
},
// UTF-8
utf8 : function(t) {
this.buf += encodeURIComponent(t);
return this;
},
// Direct copy
copy : function(t) {
this.buf += t;
return this;
}
};
Previous answer:
I do not have any setup to replicate yours, but if your case is the same as @jlarson then the resulting file should be correct.
This answer became somewhat long, (fun topic you say?), but discuss various aspects around the question, what is (likely) happening, and how to actually check what is going on in various ways.
TL;DR:
The text is likely imported as ISO-8859-1, Windows-1252, or the like, and not as UTF-8. Force application to read file as UTF-8 by using import or other means.
PS: The UniSearcher is a nice tool to have available on this journey.
The long way around
The "easiest" way to be 100% sure what we are looking at is to use a hex-editor on the result. Alternatively use hexdump, xxd or the like from command line to view the file. In this case the byte sequence should be that of UTF-8 as delivered from the script.
As an example if we take the script of jlarson it takes the data Array:
data = ['name', 'city', 'state'],
['u0500u05E1u0E01u1054', 'seattle', 'washington']
This one is merged into the string:
name,city,state<newline>
u0500u05E1u0E01u1054,seattle,washington<newline>
which translates by Unicode to:
name,city,state<newline>
????,seattle,washington<newline>
As UTF-8 uses ASCII as base (bytes with highest bit not set are the same as in ASCII) the only special sequence in the test data is "????" which in turn, is:
Code-point Glyph UTF-8
----------------------------
U+0500 ? d4 80
U+05E1 ? d7 a1
U+0E01 ? e0 b8 81
U+1054 ? e1 81 94
Looking at the hex-dump of the downloaded file:
0000000: 6e61 6d65 2c63 6974 792c 7374 6174 650a name,city,state.
0000010: d480 d7a1 e0b8 81e1 8194 2c73 6561 7474 ..........,seatt
0000020: 6c65 2c77 6173 6869 6e67 746f 6e0a le,washington.
On second line we find d480 d7a1 e0b8 81e1 8194 which match up with the above:
0000010: d480 d7a1 e0b8 81 e1 8194 2c73 6561 7474 ..........,seatt
| | | | | | | | | | | | | |
+-+-+ +-+-+ +--+--+ +--+--+ | | | | | |
| | | | | | | | | |
? ? ? ? , s e a t t
None of the other characters is mangled either.
Do similar tests if you want. The result should be the similar.
By sample provided a€”, a€, a€?
We can also have a look at the sample provided in the question. It is likely to assume that the text is represented in Excel / TextEdit by code-page 1252.
To quote Wikipedia on Windows-1252:
Windows-1252 or CP-1252 is a character encoding of the Latin alphabet, used by
default in the legacy components of Microsoft Windows in English and some other
Western languages. It is one version within the group of Windows code pages.
In LaTeX packages, it is referred to as "ansinew".
Retrieving the original bytes
To translate it back into it's original form we can look at the code page layout, from which we get:
Character: <a> <€> <”> <,> < > <a> <€> < > <,> < > <a> <€> <?>
U.Hex : e2 20ac 201d 2c 20 e2 20ac 9d 2c 20 e2 20ac 153
T.Hex : e2 80 94 2c 20 e2 80 9d* 2c 20 e2 80 9c
U is short for UnicodeT is short for Translated
For example:
a => Unicode 0xe2 => CP-1252 0xe2
” => Unicode 0x201d => CP-1252 0x94
€ => Unicode 0x20ac => CP-1252 0x80
Special cases like 9d does not have a corresponding code-point in CP-1252, these we simply copy directly.
Note: If one look at mangled string by copying the text to a file and doing a hex-dump, save the file with for example UTF-16 encoding to get the Unicode values as represented in the table. E.g. in Vim:
set fenc=utf-16
# Or
set fenc=ucs-2
Bytes to UTF-8
We then combine the result, the T.Hex line, into UTF-8. In UTF-8 sequences the bytes are represented by a leading byte telling us how many subsequent bytes make the glyph. For example if a byte has the binary value 110x xxxx we know that this byte and the next represent one code-point. A total of two. 1110 xxxx tells us i
